• 4 months ago
• Toiletrooms waterproofing , Roof Waterproofing In Vijayanagar , Waterproofing Work / Waterproofing Contractor in Begur Call Now:9945843699 , Weakening of walls , Terres Waterproofing Teracota Coatings In Bangalore , Waterproofing Work / Waterproofing Contractor in Shakambarinagar Call Now:9945843699 , Besment Waterproofing wor , PU grouting waterproofing Work , Terres Waterproofing Work in Muneshwaranagar Call Now:9945843699 , Water Tank / Sump Waterproofing in Hegganahalli Call Now:9945843699 , Water Proofing Contractor Work in Doddanekkundi Call Now:9945843699 , Water Proofing Contractor Work in Subhashnagar Call Now:9945843699 , Terres Polyurethane Waterproofing Coating Work in Konena Agrahara Call Now:9945843699 , Terrace Waterproofing In Sajay Nagar , Best Waterproofing Work & Contractor in Hegganahalli , Terres Waterproofing Work in Srinagar Call Now:9945843699 , Water Proofing Contractor Work in HAL Airport Call Now:9945843699 , Water Proofing Contractor Work in Chickpete Call Now:9945843699 , Water Proofing Contractor Work in Byatarayanapura Call Now:9945843699 , Water Tank / Sump Waterproofing in Gangenahalli Call Now:9945843699 , Over head tank waterproofing , Epoxy tiles Joint waterproofing

Epoxy Anti Skid waterproofing Yediyur Call Now: 9945843699

CL 11 has been especially designed to produce a smooth, flat surface when applied to hard, rigid sub-floors such as cement sand screeds, concrete, etc. CL 11 contains high quality special cements and selected fillers so that, when mixed with water, it produces a free-flowing mortar with self-levelling properties. The mortar can be applied at a thickness from 3 - 5mm and suitable for internal areas only.

USES

 Levelling and smoothing uneven internal sub-floors such as concrete, cement sand screed, quarry tiles, etc. prior to the installation of carpets, ceramic tiles, vinyl or parquet flooring. Not suitable for exposed wearing surfaces.

FEATURES Ÿ Pumpable: Self-smoothing: produces flat and absorbent surface for subsequent finishes .Walkable after 3 hours.  highly fluid for fast installation . Ready to receive floor coverings within 48 hours.

APPLICATION INSTRUCTIONS

Use a suitable degreaser to remove polish, wax, grease, oil and similar contaminating substances. Where hard, firmly adhered adhesive residues are present they should be of sufficient cohesive strength to support the applied levelling compound; a trial application is recommended to assess suitability. Do not apply CL 11 over old residues that are softened by water.

Surface Preparation The substrate must be dry, hard, sound, free of dust and the barrier materials such as paint, lime coatings, plaster, curing agents, wax, polish, laitance, etc.

Application Pour the mixed CL 11 onto the primed substrate and using a steel finishing trowel or float spread the material well within its working time. Roll the surface using a spiked roller to release all entrapped air.