Self leveling Epoxy flooring Waterproofing Konanakunte Call Now:9945843699

CL 11 has been especially designed to produce a smooth, flat
surface when applied to hard, rigid sub-floors such as cement
sand screeds, concrete, etc. CL 11 contains high quality special
cements and selected fillers so that, when mixed with water, it
produces a free-flowing mortar with self-levelling properties. The
mortar can be applied at a thickness from 3 - 5mm and suitable
for internal areas only.

USES
Levelling and smoothing uneven internal sub-floors such as
concrete, cement sand screed, quarry tiles, etc. prior to the
installation of carpets, ceramic tiles, vinyl or parquet flooring. Not
suitable for exposed wearing surfaces. 

Use a suitable degreaser to remove polish, wax, grease, oil and
similar contaminating substances. Where hard, firmly adhered
adhesive residues are present they should be of sufficient
cohesive strength to support the applied levelling compound; a
trial application is recommended to assess suitability. Do not
apply CL 11 over old residues that are softened by water.

Surface Preparation
The substrate must be dry, hard, sound, free of dust and the
barrier materials such as paint, lime coatings, plaster, curing
agents, wax, polish, laitance, etc.

Application
Pour the mixed CL 11 onto the primed substrate and using a
steel finishing trowel or float spread the material well within its
working time. Roll the surface using a spiked roller to release all
entrapped air.