• 7 months ago
• Water tank waterproofing , Waterproofing Contractor , Best Sheet Membring Work in SREENIVASNAGAR , Terrace Waterproofing Near Laggere , Waterproofing the roof of a building has become very significant in order to prevent damages from seeping water. This includes rusting of iron , APP Membrane Waterproofing Work , Waterproofing Solutions In Bangalore , Mangalore Tiles Waterproofing Service in Girinagar , Waterproofing Work / Waterproofing Contractor in Ullalu , Epoxy Tiles Grouting , Water Proofing Contractor Work in Nayandahalli , Best Terrace Waterproofing In Benniganahalli , Always seek expert advice and invest in the best basment waterproofing in Bangalore is Suja Waterproofing Company. We provide the Best price

Sump epoxy waterproofing coating Kempegowda Nagar Call Now:9945843699

Sikagard®-67 is a water based, solvent free, odourless,
epoxy resin protective coating

USES
Sikagard®-67 may only be used by experienced professionals.
Applied on concrete, rendering, stone, asbestos and
cement.
▪
Protective coating against weathering and mild
chemical attack in areas such as cantilevers, galleries,
retaining walls, basements, workshops, reservoirs
and balconies.
▪
CHARACTERISTICS / ADVANTAGES
▪ Protect cementitious structures against weathering
▪ Resistant to oil and grease
▪ Weather-proof
▪ Mild dew-resistant
▪ Solvent free
▪ Suitable for portable water reservoirs
▪ Easy to apply
▪ Adheres to damp surfaces 

▪ Odourless

Weak concrete must be removed and surface defects
such as blowholes and voids must be fully exposed.
Repairs to the substrate, filling of blowholes/voids and
surface levelling must be carried out using appropriate
products from the Sikafloor®, Sikadur® and Sikagard®
range of materials.

The concrete substrate must be sound and of sufficient compressive strength (minimum 20 N/mm2)
with a minimum pull off strength of 1.5 N/mm2.
The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc

The concrete or screed substrate has to be primed or
leveled in order to achieve an even surface.
High spots must be removed by e.g. grinding.
All dust, loose and friable material must be completely
removed from all surfaces before application of the
product, preferably by brush and/or vacuum