Office
NO,46, 50ft Road, Rajeev Gandi Circle Laggere
Bengaluru , karnataka
India (560058)
Resene Terracotta Sealer is a
water repellent treatment
formulated to help control
efflorescence and give a longterm waterbeading effect to deter
water penetration. Use on its own
or as a primer under waterborne
coatings. Will not prevent the
penetration of driving rain or water
under hydrostatic pressure.
Stir thoroughly before use. Low pressure spray is recommended though Resene Terracotta Sealer may be
applied by brush or roller. Apply until the surface is just saturated. Recoat if required after six hours under
normal conditions.
If a terracotta pot is being coated, ensure you coat the inside and outside of the pot to prevent moisture from
the inside traveling through the terracotta to the exterior. Allow pot to dry for at least 24 hours before adding
potting mix.
Water repellence will reduce over time. To maintain water repellence reapplication will be usually required
every three years or when water repellence disappears. Reapplication will be required when water applied
to the treated areas does not form beads.
Remove any Resene Terracotta Sealer that gets onto glass to avoid the risk of staining.