Office
NO,46, 50ft Road, Rajeev Gandi Circle Laggere
Bengaluru , karnataka
India (560058)
SikaTop®-107 Seal IN is a two part, acrylic polymer
modified cementitious liquid applied waterproofing
coating system. It comprises of a liquid polymer and a
cement based mix incorporating special admixtures. It
is applied to concrete and mortar to prevent water infiltration.
CHARACTERISTICS / ADVANTAGES
▪ Easy to apply by brush, spray or flat trowel
▪ No additional water is required to make the slurry
▪ Pre-batched components with consistent quality
Bonds well to all damp substrates
▪ Good abrasion resistance
Good adhesion to reinforced concrete, mortar or
masonry
▪
▪ Fast curing
▪ Protects concrete from chloride penetration
▪ Non-corrosive to steel and iron
▪ Approved for potable water contact
▪ Flexible enough to bridge hairline crack
Repairs to the substrate, filling of blowholes/voids
and surface levelling must be carried out using appropriate products from the Sikafloor®, Sikadur® and
Sikagard® range of materials.
▪
All dust, loose and friable material must be completely removed from all surfaces before application
of the product, preferably by brush and/or vacuum.
▪
Any wax based curing compounds or water repellent
coatings must be fully removed by scraping or grinding.
▪
▪ All intersections of horizontal and vertical surfaces
The substrate must be prepared by suitable mechanical preparation techniques such as high pressure
water jetting, needle guns, grinding, blast cleaning etc.