Suja Water Proofing Solutions Call Now on : 9945843699 / 9019095733 For - Epoxy Tiles Grouting | Terrace Waterproofing | Bathroom Waterproofing | Swimming Pool Wateproofing | Basement Waterproofing | Expansion Joint Wateproofing | Gardening Waterproofing | Exterior Wall Waterproofing.
SUJA WATERPROOFING SOLUTIONS - Latest update - water tank Waterproofing/Sump waterproofing  Kottigepalya Call Now: 9945843699

Water tank Waterproofing/Sump waterproofing Kottigepalya Call Now: 9945843699

DESCRIPTION Sikagard®-67 is a water based, solvent free, odourless, epoxy resin protective coating. USES

Sikagard®-67 may only be used by experienced professionals. Applied on concrete, rendering, stone, asbestos and cement. ▪ Protective coating against weathering and mild chemical attack in areas such as cantilevers, galleries, retaining walls, basements, workshops, reservoirs and balconies. ▪

CHARACTERISTICS / ADVANTAGES ▪ Protect cementitious structures against weathering ▪ Resistant to oil and grease ▪ Weather-proof ▪ Mild dew-resistant ▪ Solvent free ▪ Suitable for portable water reservoirs ▪ Easy to apply ▪ Adheres to damp surfaces ▪ Odourless APPROVALS / STANDARDS Food grade (USFDA 175.300 1st April 2017) from CFTRI, Mysore ▪ PRODUCT INFORMATION

APPLICATION INSTRUCTIONS SUBSTRATE QUALITY / PRE-TREATMENT The concrete substrate must be sound and of sufficient compressive strength (minimum 20 N/mm2) with a minimum pull off strength of 1.5 N/mm2. The substrate must be clean, dry and free of all contaminants such as dirt, oil, grease, coatings and surface treatments, etc. If in doubt apply a test area first. Concrete substrates must be prepared mechanically using grinding equipment, abrasive blast cleaning or scarifying equipment to remove cement laitance and achieve an open textured surface. Weak concrete must be removed and surface defects such as blowholes and voids must be fully exposed. Repairs to the substrate, filling of blowholes/voids and surface levelling must be carried out using appropriate products from the Sikafloor®, Sikadur® and Sikagard® range of materials. The concrete or screed substrate has to be primed or leveled in order to achieve an even surface. High spots must be removed by e.g. grinding. All dust, loose and friable material must be completely removed from all surfaces before application of the product, preferably by brush and/or vacuum

Contact us today!

We assure best work.