Office
NO,46, 50ft Road, Rajeev Gandi Circle Laggere
Bengaluru , karnataka
India (560058)
CL 11 has been especially designed to produce a smooth, flat
surface when applied to hard, rigid sub-floors such as cement
sand screeds, concrete, etc. CL 11 contains high quality special
cements and selected fillers so that, when mixed with water, it
produces a free-flowing mortar with self-levelling properties. The
mortar can be applied at a thickness from 3 - 5mm and suitable
for internal areas only.
USES
Levelling and smoothing uneven internal sub-floors such as
concrete, cement sand screed, quarry tiles, etc. prior to the
installation of carpets, ceramic tiles, vinyl or parquet flooring. Not
suitable for exposed wearing surfaces.
Application:
Use a suitable degreaser to remove polish, wax, grease, oil and
similar contaminating substances. Where hard, firmly adhered
adhesive residues are present they should be of sufficient
cohesive strength to support the applied levelling compound; a
trial application is recommended to assess suitability. Do not
apply CL 11 over old residues that are softened by water.
The substrate must be dry, hard, sound, free of dust and the
barrier materials such as paint, lime coatings, plaster, curing
agents, wax, polish, laitance, etc.
Chartersists:
Walkable after 3 hours
Ÿ Ready to receive floor coverings within 48 hours
Pumpable: highly fluid for fast installation
Self-smoothing: produces flat and absorbent surface for
subsequent finishes